Hi Guys and Gals
I saw Koyote's setup and thought I share the one Im working on now. The pics are about a week old and I've already made changes. Any Questions, feel free to ask.
I was having problems uploading pics, so I hosted them on amazon.com
Then had the 600pixel limit. resized and reuploaded, then got a "It was not possible to determine the dimensions of the image"
Initial Mockup
Designed so I have quick access to all mixing devices
Left PC is for lookup, preview DJ and Backup
Right PC is dedicated KJ
10 Ply Concrete Form Plywood
I have 6 15amp switches, I was going to buy a Rack Switch but the reviews on the cheaper ones were not so good. Theses are very serviceable but somewhat expensive at $17 per triple switch.
each switch controls 1 duplex outlet
Im using a inverted wire shelve to hold the laptops and mixer
Works good for ventilation as well as wire access
The 40" width was designed to fit perfectly on the rear deck of my Mazda Hatch
Currently switches are as follows from left to right
1 - Left PC and Monitor
2 - Mixer and wireless Mics
3 - Right PC and Monitor
4 - Amplified PA Speaker
5 - Disco Ball Motor and lights
6 - Singer Flood lights
Im planning to buy this and make mounts for it
There it is. Hope you liked it. I can keep updating this as it progresses if there's interest.
Peace