Meep70 @ Sun Jul 26, 2009 6:55 pm wrote:
Give a look/listen to the Peavey PR10 and PR12 speakers. For the last 22 plus years, I designed and built my own speakers, to get the accuracy and clean sound I desire, but three years ago, I bought a pair of PR10s and have been happy ever since. I have been QUITE happy with the sound of f my PR10s, and that is from someone who is ABSOLUTELY anal about accurate, clean sound.
This is almost hysterical. I'm sorry I don't normally call people out directly on their equipment recommendations (we've all got our opinions and I try to keep that in mind) but to claim that the budget line of a budget manufacturer are somehow absolutely accurate and clean is beyond laughable.
I've seen the PR10's and PR12's in action and have even had the opportunity to play with them a bit. They are exactly what you'd expect to get for the price. They sound ok. However, they're in a very light weight molded enclosure so the first thing you notice is they bleed sound out the back and sides horribly, worse than either of the first two generations of the JBL EONs which were horrible for this as well. These cabinets also introduce a great deal of distortion in the low and sub-low frequency ranges.
The other painfully obvious weakness with these speakers is the lack of quality in the passive crossover. Frequency response around the crossover point is completely out of control and if one is not versed in correcting for this on the EQ the results with the PR series can be horrible.
One other notable weakness is the reproduction of bass frequencies below about 80Hz. The woofers in the PR series are Peavey's cheapest line and it shows when you ask them to perform anywhere near the Sub-low range. As the woofers get close to their excursion limits, the harmonic distortion they generate becomes pretty audible.