|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 9 posts ] |
|
DannyG2006
|
Posted: Sun Mar 29, 2009 12:28 pm |
|
Joined: Sun Nov 27, 2005 11:31 am Posts: 5407 Location: Watebrury, CT Been Liked: 408 times
|
I personally doubt it as you can't get the mix right if separate sound systems are handling voice and music. I believe that you would need them together to sound right.
_________________ The Line Array Experiment is over. Nothing to see here. Move along.
|
|
Top |
|
|
mr.fahrenheit
|
Posted: Sun Mar 29, 2009 12:35 pm |
|
|
Major Poster |
|
Joined: Fri Oct 31, 2008 3:09 am Posts: 88 Been Liked: 0 time
|
I wouldn't have thought it any better as long as you have a decent sound system to start with.
Why bother carrying, setting up and controlling 2 systems instead of 1.
_________________ [font=Fantasy][/font] "Travellin' at the speed of light"
|
|
Top |
|
|
jsay1231
|
Posted: Sun Mar 29, 2009 12:40 pm |
|
|
newbie |
|
Joined: Wed Mar 25, 2009 8:12 am Posts: 2 Been Liked: 0 time
|
More than likely, you are correct. I just thought that maybe having two distinct and separate systems would allow for each to be separately tweeked. But I do appreciate your response, and unless someone else could add their thought, more than not I will not go ahead...again thanks...
|
|
Top |
|
|
ripman8
|
Posted: Sun Mar 29, 2009 5:08 pm |
|
Joined: Sat Nov 15, 2008 6:34 pm Posts: 3616 Location: Toronto Canada Been Liked: 146 times
|
jsay1231 @ Sun Mar 29, 2009 2:40 pm wrote: More than likely, you are correct. I just thought that maybe having two distinct and separate systems would allow for each to be separately tweeked. But I do appreciate your response, and unless someone else could add their thought, more than not I will not go ahead...again thanks...
What would you be able to tweak that you can't with one system?
|
|
Top |
|
|
jamkaraoke
|
Posted: Sun Mar 29, 2009 5:44 pm |
|
Joined: Thu Dec 26, 2002 10:54 am Posts: 3485 Location: New Jersey , USA Been Liked: 0 time
|
I think 1 decent sound PA system handling the music and the vocals is the way to go .
What do you do with DUETS ---do you need an extra system
|
|
Top |
|
|
Lonman
|
Posted: Sun Mar 29, 2009 6:35 pm |
|
Joined: Mon Dec 10, 2001 3:57 pm Posts: 22978 Songs: 35 Images: 3 Location: Tacoma, WA Been Liked: 2126 times
|
If you can't get a good mix with one system, then you do not know the equipment. A good mixer, not overpowering effects, proper eq for both music & mics, proper gain structure is going to go along way. Why waste the time bringing in a complete second system when one is all you need.
_________________ LIKE Lonman on Facebook - Lonman Productions Karaoke & my main site via my profile!
|
|
Top |
|
|
TOMMIE TUNES
|
Posted: Mon Mar 30, 2009 3:54 am |
|
|
Advanced Poster |
|
Joined: Sat Jul 29, 2006 5:06 am Posts: 255 Been Liked: 0 time
|
Another way to achieve what you are trying to do is by use of monitor mixes from your Aux sends ( if your mixer is so equiped). You can use either powered speakers or another Amplifier and passive speakers and tailor your vocal/music mix this way. I use four speakers on stands next to my mains with primarily vocals coming through and about 5 percent music. I do the same thing with an additional mix from powered speakers that i have on the floor and the vocals cut through the mix real nice. I use a Mackie-cfx -12 mixer that has -2- Aux sends. The reason that I use so many speakers is because my set-up is in a fairly small room and it is hard to get the proper gain structure through the main mix alone without fighting alot of feedback through the microphones.
_________________ Man Must Know His Limitations -Clint Eastwood
|
|
Top |
|
|
TopherM
|
Posted: Mon Mar 30, 2009 11:48 am |
|
Joined: Mon Dec 20, 2004 10:09 am Posts: 3341 Location: Tampa Bay, FL Been Liked: 445 times
|
If you separate the systems like you stated, then you are probably going to have delay issues with the two separate sources being out of wack. If you have the ear to correct the delay by properly alligning the speakers (either physically moving them or virtually moving them through a delay effect), then it is going to sound just fine.
HOWEVER, like everyone has said, that sure is alot of work when you could just run a good, solid single system and get the same sound. Why PHYSICALLY separate the input sources and frequencies when a $100.00 crossover will ELECTRONICALLY do the same thing for you?
I run a bi-amped, full-range system, which is similar to what you are trying to acheive, but just more logical, as it runs through an active crossover and doesn't have delay issues. 500 watts/channel to my 15" Peavey SP5s that only get the low frequencies, then 400 watts/channel to my Peavey PR12s that get the mid and high frequencies. So, in the karaoke application, the SP5s are playing only the low frequencies from the music, while the PR12s handle the mids and highs of the music and the majority of the vocal tones (which are mostly mid-range tones).
What you described above is almost the same concept, except maybe a tri-amped full range system with separate low, mid, and high speakers and amps to isolate the majority of the vocal tones within one speaker set.
Anyway, that is the "proper" way to incorporate mutiple systems into a single PA.
_________________ C Mc
KJ, FL
|
|
Top |
|
|
|
Page 1 of 1
|
[ 9 posts ] |
|
Who is online |
Users browsing this forum: DannyG2006 and 505 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|