| Karaoke Scene's Karaoke Forums https://mail.karaokescenemagazine.net/forums/ |
|
| Direct Box ? https://mail.karaokescenemagazine.net/forums/viewtopic.php?f=1&t=18104 |
Page 1 of 1 |
| Author: | ScottyMo1 [ Thu Oct 22, 2009 4:13 am ] |
| Post subject: | Direct Box ? |
I currently run a Yammy EMX 512 powered mixer. The bar I work at has a nice house system. It is set up FOH and I like to work from the stage. I used a direct box at a different venue once to tie into the house system so I could control things from the stage, but I can't remember how to hook things up. Hopefully the gear gurus here can point me in the right direction. It would save me bringing in my speakers, etc. if I could tie into the house system. Thanks for the help Scotty Mo |
|
| Author: | letitrip [ Thu Oct 22, 2009 4:25 am ] |
| Post subject: | Re: Direct Box ? |
If you're going to use a direct box to do it (you really should just be able to send the main out to a stereo input channel on their console) you'd just run the main outs from the front of the EMX 512 to a stereo direct box and then from the direct box run to a pair of channels on their mixer. Pretty straight forward. |
|
| Author: | LondonLive [ Thu Oct 22, 2009 8:18 am ] |
| Post subject: | Re: Direct Box ? |
The jacks marked "Main Out" on the EMX512sc are unbalanced so if you are sending the signal over any distance at all a direct box would be the preferred method. As previously stated, just run from the "Main Out(s)" of the EMX to an open Input Channel(s) on the house board. |
|
| Author: | letitrip [ Thu Oct 22, 2009 8:29 am ] |
| Post subject: | Re: Direct Box ? |
LondonLive @ Thu Oct 22, 2009 10:18 am wrote: The jacks marked "Main Out" on the EMX512sc are unbalanced.
Eww that sucks. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|