| Karaoke Scene's Karaoke Forums https://mail.karaokescenemagazine.net/forums/ |
|
| using 1 JBL EON G2 https://mail.karaokescenemagazine.net/forums/viewtopic.php?f=1&t=18434 |
Page 1 of 1 |
| Author: | micbob [ Fri Dec 11, 2009 9:06 am ] |
| Post subject: | using 1 JBL EON G2 |
Im playing a very small venue tonight and want (need) to only use one JBL eon G2 speaker. How would I set it up on my mixer to get left and right channels playing through speaker? I was thinking left main out to speaker then use two channels on board to control left and right. THanks 
|
|
| Author: | mckyj57 [ Fri Dec 11, 2009 9:45 am ] |
| Post subject: | Re: using 1 JBL EON G2 |
micbob @ Fri Dec 11, 2009 12:06 pm wrote: Im playing a very small venue tonight and want (need) to only use one JBL eon G2 speaker. How would I set it up on my mixer to get left and right channels playing through speaker? I was thinking left main out to speaker then use two channels on board to control left and right. THanks
Might be helpful to know which mixer you have.... |
|
| Author: | micbob [ Fri Dec 11, 2009 10:17 am ] |
| Post subject: | Re: using 1 JBL EON G2 |
Sorry, Mackie cfx12 mixer |
|
| Author: | letitrip [ Fri Dec 11, 2009 10:56 am ] |
| Post subject: | Re: using 1 JBL EON G2 |
Really easy actually. On the CFX12, everything has to go through the Sub Groups. Leave everything on your board setup the way you would usually have it (don't change the panning of channels or anything). Go to the sub-group channels that you're using (the blue faders labelled 1-4) and use the assign buttons to assign them each to LEFT only (Under normal circumstances they're probably set so that 1 & 3 are assigned LEFT and 2&4 assigned to right). By assigning them all to left only, all your output, whether panned right or left, will be sent to the left main out. Now just connect your EON to the Left main out on the board and you're all set. Use the rest of the board the way you normally would as if you were running in stereo. |
|
| Author: | micbob [ Fri Dec 11, 2009 11:59 am ] |
| Post subject: | Re: using 1 JBL EON G2 |
Thanks!
|
|
| Author: | Lonman [ Fri Dec 11, 2009 12:13 pm ] |
| Post subject: | Re: using 1 JBL EON G2 |
Unless you are using the stereo channels, then you have to run those channels panned straight up, running through a separate subgroup (I always ran mics on 1-2 & music on 3-4), then in the sub group for the music channels, push BOTH 3 & 4 left button (you will be using both 3-4 sub faders) otherwise you won't be getting the full recorded signal. |
|
| Author: | micbob [ Fri Dec 11, 2009 12:29 pm ] |
| Post subject: | Re: using 1 JBL EON G2 |
I would have music in 11/12 stereo channel. So run 11/12 with 3&4 button pushed down and left button pushed down on 3 & 4 sliders? |
|
| Author: | Lonman [ Fri Dec 11, 2009 1:15 pm ] |
| Post subject: | Re: using 1 JBL EON G2 |
micbob @ Fri Dec 11, 2009 1:29 pm wrote: I would have music in 11/12 stereo channel. So run 11/12 with 3&4 button pushed down and left button pushed down on 3 & 4 sliders?
Correct! |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|