Karaoke Scene's Karaoke Forums
https://mail.karaokescenemagazine.net/forums/

Settings on a Mixer Channel Not Being Used...
https://mail.karaokescenemagazine.net/forums/viewtopic.php?f=1&t=18957		 Page 1 of 1
Author:  oicclouds [ Fri Jan 29, 2010 2:23 pm ]
Post subject:  Settings on a Mixer Channel Not Being Used...
Very clueless here. Just wondering what should the settings for fx/high/mid/low, etc be on a channel that is not being used. Do you set it to zero (around 7 o'clock)?

Thanks, Vicki
Author:  Lonman [ Fri Jan 29, 2010 3:24 pm ]
Post subject:  Re: Settings on a Mixer Channel Not Being Used...
oicclouds @ Fri Jan 29, 2010 3:23 pm wrote:
Very clueless here. Just wondering what should the settings for fx/high/mid/low, etc be on a channel that is not being used. Do you set it to zero (around 7 o'clock)?

Thanks, Vicki

Doesn't really matter if the channel isn't being used. I will usually zero any channel out that isn't in use, but again, doesn't matter.
Author:  oicclouds [ Fri Jan 29, 2010 9:01 pm ]
Post subject:  Re: Settings on a Mixer Channel Not Being Used...
Thanks! I didn't think it mattered since not being used.......is not being used. LOL! I'd rather ask a silly question instead of not and then mess up something!

Vicki
Author:  mckyj57 [ Sat Jan 30, 2010 8:02 am ]
Post subject:  Re: Settings on a Mixer Channel Not Being Used...
I turn the Trim/Gain down, because those being all the way up can introduce noise even though nothing is connected.
Author:  letitrip [ Mon Feb 01, 2010 8:21 am ]
Post subject:  Re: Settings on a Mixer Channel Not Being Used...
mckyj57 @ Sat Jan 30, 2010 10:02 am wrote:
I turn the Trim/Gain down, because those being all the way up can introduce noise even though nothing is connected.


Agreed, and if you mixer is equipped with a mute or on/off button on each channel, always a good idea to turn it off or engage the mute too.
Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/