Karaoke Scene's Karaoke Forums https://mail.karaokescenemagazine.net/forums/ |
|
Connecting a Philips SWA2080W/27 Black Universal Microphone to mixer https://mail.karaokescenemagazine.net/forums/viewtopic.php?f=1&t=20354 |
Page 1 of 1 |
Author: | vaydee [ Tue Oct 12, 2010 8:20 pm ] |
Post subject: | Connecting a Philips SWA2080W/27 Black Universal Microphone to mixer |
Hello, While my shure 58 mic is being shipped I wanted to see if the other cheap Philips universal microphone canbe connected to my YAMAHA MW10c mixer.. I mic has 1/4 inch adapter and it goes into the mic ports on the mixer but the sound does not seem to pass through the mic. Is it even possible to use the universal mic with the yahama mixer?? Here is a picture of the mic that I am trying to connect https://www.honeydohardware.com/comersu ... duct=83634 Here is a picture of the mixer http://www.samedaymusic.com/product--YAMMW10C Thanks Vaydee |
Author: | Paradigm Karaoke [ Tue Oct 12, 2010 10:39 pm ] |
Post subject: | Re: Connecting a Philips SWA2080W/27 Black Universal Microphone to mixer |
it should work. did you perhaps plug it into the insert instead of the line input? use the 1/4" closest to the xlr input. |
Author: | Lonman [ Wed Oct 13, 2010 1:58 am ] |
Post subject: | Re: Connecting a Philips SWA2080W/27 Black Universal Microphone to mixer |
It's possible the mixer does not like the unbalanced jack - you could try to use an XLR adapter http://www.bhphotovideo.com/c/product/1 ... 3_Pin.html Although this one I do not believe is a true converter/transformer. If like stated you aren't in the correct jack, then it won't work at all, if you are in the 'line' jack and still not getting sound (I am assuming you have the gain & level control turned up on the channel), then try to stick it into one of the stereo channel 7/8 or 9/10 MONO jack. If this still doesn't work, you possibly have a defective mic. |
Author: | tim_aka_tim [ Wed Oct 13, 2010 6:57 am ] |
Post subject: | Re: Connecting a Philips SWA2080W/27 Black Universal Microphone to mixer |
I've plugged the exact same mic into my Behringer mixer and it works fine, though the output level is low - needed all levels turned way up. |
Author: | vaydee [ Wed Oct 13, 2010 2:59 pm ] |
Post subject: | Re: Connecting a Philips SWA2080W/27 Black Universal Microphone to mixer |
Thanks gurus for the quick replies. I will give it a try again. |
Author: | letitrip [ Wed Oct 13, 2010 4:44 pm ] |
Post subject: | Re: Connecting a Philips SWA2080W/27 Black Universal Microphone to mixer |
You may find this article helpful: http://www.suite101.com/content/how-to- ... ut-a261049 |
Page 1 of 1 | All times are UTC - 8 hours |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |