anhlunnhaque @ Thu Jan 17, 2008 11:56 am wrote:
This is what I put together...but I don't know if it would work:
Mixer:
-Behringer PMH1000 powered mixer ($300)
This is more affordable at the moment than the Yamaha MGX mixer ..but what's good about the Yamaha MGX mixer ??? It looks really nice and high tech...but would a regular user benefit from it???
The Yamaha would yield better sound quality & overall reliability. Behringer is generally a more 'disposable' unit (although some do have good luck with them). But with the powered speakers you have outlined below, there is no need for a powered mixer as well. It sounds like you have little experience with sound gear (not trying to be a jerk). This may be more of a complex system than you want to begin with. Consider a Mackie DFX6 or DFX12 for the mixer.
Quote:
FX:
-Lexicon MX-200 effects ($200) From what I've been reading..is this the thing that I need to get more echos in the vocal right????
Yes this is your effects processor for reverbs, delays, choruses, among others. If you go with the Mackie DFX mixer, it has a built in effects processor that will be sufficient for you to learn some basic mixing.
Quote:
Speakers:
-Mackie SRM350 2-Way Active PA Speaker ($550 x 2 = $1100)
Looks like this is the mose recommended speaker here...In one of the other post on speakers..somebody suggested the JBL X something...it goes for $1900 a pair...so this is afforable...I guess I won't go wrong with it...
Good speakers. Would definitely want to run a sub for outdoors & larger rooms. Consider another alternative (I recommended at bottom).
Quote:
Sub:
-I already have an old sub that I would like to use at the moment.....will buy Mackie SWA1501 subwoofer later. But would all the component here work with an old sub?
What kind of sub? Is it powered - if not you'll need a separate amp? Does it have a built in crossover - if not you'll need a separate crossover (which you can utilize for the 350's as well) or would need an amp with a crossover built in?
Quote:
Mic:
-Already have..but will buy the Shure SM58 when needed...
Good choice with the Shure.
Quote:
Can you explain briefly on what this would do? What's the benefits? Do I really need now?
- Behringer Ultragraph 3102 EQ
Graphic equalizer allowing you to aid with feedback control and or tonal shaping (changing the sound of bass/midrange/high frequencies in your speakers). Nice to have, but not a necessity until you learn a little more, could actually cause worse sound improperly adjusted.
Quote:
- BBE sonic enhancer/crossover
'Enhancer' This is a frequency aligner, helps crispen up the mix, adds some punch to the low end. Do you need it, probably not but again, nice to have. Now the crossover part may be needed for your sub/main speakers.
Quote:
Do I need this for to current setup that I suggested above? Or should I get it so that I can upgrade in the future?
-Behringer EP2500 power amp
Well depending on your sub, you may need a power amp, however, you'd have to know the subs power handling capability & ohms rating before we could recommend an amp to match it. If you can get the subs make/model at the very least & then if it states power handling, looking for continuous/rms/program/peak ratings if any are listed.
Quote:
I notice that the first option you didn't recommend any amp..but the second one you did recommend the Behringer EP2500 power amp. So here's my questions...
In what scenario do I need an amp and why...? I read something about Power Speakers that have amp built in already..so I guess that's why amp is not needed? So is good to get power speakers and not use any amp. Or get non power speaker and get the amp to use with it...Or it's best to get the amp be use with power speakers??
In his first scenerio he was outlining powered speakers (these have the amps built in). The second scenerio the speakers are passive (needing an outside amp to power). As far as to which is better amp vs no amp, it depends on your overall plans. Separate amps & passive speakers gives you greater flexibility for expanding, however you have to know how to properly match the amp to the speaker. Powered speakers are great because the amp built in is already matched for the speakers for peak efficiency but then you are basically locked into them as far as upgradability - not a huge deal, you could always buy a second pair for more power.
Quote:
Mixer.... I am a little bit confused about "power mixer" too...is that the same thing as the power speakers where the amp is built into the mixer? Can a power mixer be use with power speaker or non power speaker? And does the amp needed when you have the power mixer and power speaker???
The powered mixer also has a built in amp. You would not need to have powered speakers with a powered mixer - you CAN run it to work, but you would basically just be spending extra money for the amp part of the mixer that you'd pretty much not use. Stick with the powered speakers, a simple mixer until you get some knowledge & experience in some basic sound gear. The little DFX mixer & a decent set of powered speakers would give you a nice little home system that you'd still be able to run some basic little parties with & won't be disappointed in the sound.
Quote:
Sorry for the newbie questions..I've read the forum for 3 days now...and I am not really clear on it..can you shine the light on me?
Thanks!!!
It's the only way to learn, always ask!
So again, my recommendation would be for
Mackie DFX12 mixer
http://www.musiciansfriend.com/product/ ... sku=634264
Even though the Mackies are good, here is a little 3 piece powered system that is a good little system as well. The B52 Matrix 1000, 2 satellite speakers & a powered sub. and a little cheaper & give quite a bit of punch.
http://www.musiciansfriend.com/product/ ... sku=606060
I would forgo the effects processor at this time, the DFX has one built in. The system is easy to learn, will sound great in the home & won't break the bank. ($1100)