Below is a summary of what I was able to collect from my research for a good starter Karaoke system:
- Avoid "Karaoke" branded stuffs. Not only these could be as expensive or more than the "pro" equipments, but also limited in term of reliability - quality - flexibility and expandability.
Mixers:
Go with a good non-powered mixer such as:
- Mackie DFX-6/12 ($150-$250)
- Mackie ProFX-8/12 ($230-$280)
- Yamaha MG82CX ($150) or MG124CX ($250)
- Yamaha MW8CX ($250) or MW12CX ($350) with USB (2 channels recording)
- Alesis Multimix 8 USB ($150 2-stereo channels recording = USB 1.1)
- Alesis Multimix 8 Firewire ($200 8 channels recording)
- Alesis Multimix 8 USB 2.0 ($250 8 channels recording)
The Yamaha mixers look more attractive with FX effects and built-in mic compression (great for vocal). On the other hand, the Mackie ProFX or Alesis Multimix series come with USB or Firewire connectivity for recording.
Note: Most USB 1.1 mixer would allow only 2-stereo channels recording whereas USB 2.0 and Firewire units can be all channels capable for multi-tracks recording.
Speakers:
- Go with PA powered speakers - compact, portability, flexibility, expandability and no worries as opposed to matching a separate amp to some passive speakers.
Entry system:
************
It sounds like a pair of Behringer B212A (400W 12" 36lbs $250 ea) is the way to go for an entry level system. Inexpensive and yet powerful while delivering clean and punchy sound in the mid/high, good for vocal applications as well as other musical instruments such as keyboards, acoustic guitar, etc... Coupled with a sub, it will cover the lower end as well. Also, it is good to know that the Behringer B212A/B215A are reported as quite reliable and not subjected to quality issues based on various online users reviews.
The Tapco Thump TH-15P (300W 15" 36lbs $330 ea) looks very attractive on the paper and gets some notoriety as designed/manufacctured by Mackie. It provides a better thump in the low frequency range thanks to its 15" driver. However, it doesn't sound as clean as the Behringer B212A in the Mid/High range where vocal applications are more dominant.
The recommendation is to save a bit more and spend on the next level speakers for better quality and product support.
Update: I have found from the vdrums users forum that another entry powered speaker Kempton GT12A (250w biamp 12" $600 a pair) designed by the acclaimed Italian FBT (made in China like most but comes with 2yr warranty) could be a good alternative that fits the bill as well.
It had been reported to sound as good as the JBL EON series or Mackie SRM450 - and comes with dual 1/4" TRS channel inputs - separate EQ for each channel (see pix). I'd pick the Kempton over the previous ones.
# Built-in amplifier: 200w+50w RMS class AB
# Frequency response: 50Hz - 20kHz @ -6dB
# 12" woofer, 2" coil, 1" driver, 1.4" coil
# Sensitivity: 97dB
# Max SPL: 121dB
# 38 lbs
Good:
******
Other mid-entry powered speakers to consider are:
- Carvin LM12A (molded 350W 12" 34lbs $370)
- Carvin LM15A (molded 350W 15" 39lbs $410)
- Carvin LSx1502A (wood 350W 15" 49lbs $390)
- Carvin LSx1202A is not suggested as it does not have enough response in the low frequency unless coupled with a subwoofer (which is recommended in any case).
- Yorkville NX25P (200W 12" 40lbs $450)
Note: CARVIN is a US based company and the speakers are made in USA - come with 3 years warranty and would definitely be a step-up from the Behringer in all terms.
http://www.carvinguitars.com/speakers.php
Better:
*******
On the other hand, in the $500 range, one could also just buy just ONE (and get a second one down the road) better speaker such as:
- Carvin LSx1503A (425W wood 3-way $490)
- RCF ART310a (350W 10" 26lbs $550) for its light weight
- JBL EON 15 G2 (400W 12" 46lbs $550)
- Yamaha MSR400 (300W 12" 50lbs $550) for its overall smoothness for vocal and instruments performance.
- Electro-Voice EV SXA100 (200W 12" 42lbs $600)
These speakers would provide great quality and clean sound that the entry level ones can't match and that would be money well spent.
Note: I didn't include the popular and acclaimed Mackie SRM350/450 in this category b/c it sounds like these are best suitable for PA purposes for their loudness, punch but these are a bit harsh on the vocal side based on various online users reports.
Best:
******
Last and not least, if money is not an issue, then the upper scale powered speakers such as:
- RCF ART series (312A, 315A, 322A, 325A)
- Electro-Voice EV SXA250 (430W 15" 42lbs $800)
- Yorkville NX55P (550W 12" 47lbs $800)
- JBL PRX512M (500W 12" 40lbs $900)
- QSC HPR122i (500W 12" 60lbs $800)
- QSC HPR152i (500W 15" 100lbs $1000) heavy weight
These speakers have been cited many times as the preferences for great sound quality for vocal and/or PA applications.
Other online comparisons/reviews:
Carvin LM12A ($350) vs. QSC HPR122i ($800) vs. JBL PRX512M ($900) Powered Speakers Shoot-out!!!
http://www.setbb.com/axefx/viewtopic.ph ... orum=axefx
All other comments are welcome as it would help other newbies...
Thanks a bunch to all the contributors...