Quote:
Thanks again JD.
No problem, it's always nice to be able to help somebody get heading in the right direction and save them a few bucks while your at it.
ripman8 @ Fri May 08, 2009 7:00 pm wrote:
One question JD. i am running my sub thru the Monitor Speaker (left monitor output) 1/4". Am I getting the best overall sound and volume with my PAs and sub this way? Mixer is Yamaha MG124CX.
Yes that would work. That's called an Aux fed sub, fairly popular these days. I think you could also accomplish the same thing by using your 1/2 switch and your ST Switch on your music channel on the Yamaha and running your sub off the group 1/2 fader. I'll assume you have your Carvin set @ 120Hz and letting the Yorkvilles handle every thing else. Make sure the NX55P's are set to 100hz so you don't have to much of an overlap, that could cause cancelling. By the way, the "In/Out" jacks on the back of the Yorkvilles are actually wired parallel in case you didn't notice. That might save you some grief down the road.